EPER 500 - Assembly Instructions
EPER 500 consists of 5 parts:
- Electrical percussor with attached speed regulator
- Power supply
- Power cord
- Cigarette lighter adapter
EPER 500 operates in 2 modes:
- Inside - connected to a power outlet
- In car - connected to a cigarette lighter socket (car engine must be running)
To use EPER 500 inside, connect the percussor’s speed regulator to the power supply. Use the supplied power cord to plug the power supply the power outlet. EPER 500
operates in the range BETWEEN 110-230VAC.
To use EPER 500 in a car, connect the percussor’s speed regulator to the cigarette lighter socket using provided adapter.
In both modes use the speed regulator knob to turn on the percussor and to set the desired speed.
To attach the handle to the percussor, drop the speed regulator through the round opening in the
handle and tighten it on the percussor using the knob. Adjust the handle’s position on the percussor to achieve the most effective percussion.
EPER 500 is warranted to be free from defects of workmanship and materials for the period of 1 year from the date of original purchase.
This warranty does not apply if repairs have been made or attempted by others, repairs are required because of normal wear – device has been abused, misused or improperly maintained – alterations have
been made to the device.
EPER 500 is equipped with medical grade isolated power supply providing 12 VDC on its output. The speed controlling box supplies safe low voltage in the range of 1-5 VDC to the handheld percussor. Do not expose EPER 500 to wet conditions, do not abuse the cords, do not obstruct ventilation
openings when operating the device.